Cotton Iron On Mender 12x45cm

• Tidy frayed edges from torn or ripped areas and turn garment inside out. 
• Make a pattern of the hole/tear with paper. 
• Using the pattern, cut a suitable piece of surplus material or a piece of fabric chosen to match. 
• Place material in the hole, ready to place another piece of mender on top. 
• Cut mender larger than damaged area and round the corners with scissors to prevent fraying. 
• Place mender, adhesive side down, over the material and hole/tear on the inside of the garment. 
• Set iron to required temperature. 
• Place ironing cloth over the garment and iron for required time. 
• Allow to cool for 5 minutes, test to see if fully bonded. If not fully bonded, repeat step above. 

Care Instructions

• Always test on inconspicuous area first. 
• Korbond Iron On Mender is washable and dry cleanable. 
• Do not use steam setting when ironing.